How To Remove and Change Bike Pedals The Easy Way

How To Remove and Change Bike Pedals The Easy Way

You would be thinking that taking off the bike pedals could be easy, but it can be troublesome especial when you are making it loose or tighter for the first time.

The reason behind this is that each thread of pedals requires different directions to tighten them.

So if the pedal is turning in the same direction where the momentum goes, it will create several complications to tighten the screws of the pedals. Once you understand the basics of removing pedals from the bike, you can get enough solutions to repair your bike effectively.

Bike pedal change is not a complicated process, but you need to use the right tools and techniques to enhance its effectiveness in pedal change while doing it.

This step-by-step guide will relieve all your tension of changing the bike pedals efficiently and give you a smooth biking experience with a piece of knowledge in maintaining the bike effectively.

Tools Required To Change Bike Pedals

It depends on the pedals you are using on your bike that what kind of tools are crucial for maintaining it. You may require a 15 mm open jerk or Allen keys of 8mm or 6mm.

The critical size will depend on the pedal size, which you can effectively change without any complications.

While changing the pedals from the bike, you will also need some extra lubrication to make the process easy. Also, some protective washers can become essential tools to offer a safe cycling experience.

While changing pedals, you can also choose to go with Facom’s sliding T-handle keys and a wrench set of 440 XL to nullify the pressure in opening the pedals.

If your pedals come with parallel faces, then a 15 mm spanner can become a crucial tool to open them and change efficiently. Some expensive pedals require different toolsets to open and replace with the others, where you need some wrench and other tools to replace your pedals.

Left vs. Right Pedal Threading Explained

Bike modification requires a piece of knowledge to complete the task efficiently. If you have changed pedals previously, then you are aware of their mechanism, that which pedal belongs to which side.

When you are buying a pedal set, you will get an idea of which one is the left and the right side pedal.

The manufacturer always mentions left or right on a small sticker that you will find on the pedal. The right pedal has the right threaded tool that can become righty-tighty and lefty-loosey.

The threading in the right pedal will have upwards threads that allow you to tighten the pedal efficiently.

The left pedal has the left threaded tool with lefty-tighty and righty-loosey experience while installing the pedal. The unusual threading in bike pedals makes it a safe pedal, which never falls off while riding your bike.

You may get a little frustration while you first change your pedals, but understanding the correct thread will nullify the errors you may experience while pedal changing.

Likewise, the left-right pedal threading helps you know when the proper installation.

How To Remove Bike Pedals

When you are ready to take off your bike pedals, choosing the right strategy will help you modify the pedals. Going with the right threaded pedals will release all the tension you may feel while changing bike pedals.

Removing and changing pedals is not a big deal; you may experience a smooth process using the right tools.

Removing pedals is not a big deal, unless you are doing it for the first time. Choose the relevant tools while loosening the pedals, which will help you prepare a better strategy to modify the pedals.

For example, some pedal models don’t work with a wrench, where you need to go with an 8mm hex fitting, which will create a better removal where you don’t need to push yourself a lot.

  • Rotate the crank arm of the pedals to access the pedal removal. You need to know which direction you are choosing to rotate the pedal that can give you smooth modification.
  • Use the pedal wrench on the spindle flats of your bike’s pedal, or if you are using a hex wrench, then put it into your bike’s crank arm.
  • When you start using the wrench, make sure to make a 90-degree angle between the wrench and the pedal arm. A correct mechanical advantage is crucial in pedal removal, where you will get a smooth pedal removal.
  • The first attempt to loosen the pedal will be challenging, where pushing forcefully will help you lose the pedal efficiently. Next, use the clockwise direction to lose the left-side panel and go counter-clockwise for the right-side panel.
  • When you get the loose pedal after pushing it hard, go with the spindle and keep rotating until the pedal leaves the crank arm.
  • After the pedal leaves the crank, you can go with the installation of other pedals.

How To Install Bike Pedals

When you are ready to install new pedals on your bike, then you need to figure out the right pair of pedals that your bike needs. Check the “L” and “R” mark on your cycle before installing the pedals, and also, you can go for pedal threading to know the right pedals.

Then, when your bike is ready to take the pedals in, you can go with the lubrication and make it a perfect one before installing the pedals.

Let’s go step-by-step methods you need to go through while installing new pedals on your bike and maintain a perfect balance of left-right pair.

  • Heavily put some grease on the threads of your pedals. Also, lubricate the crank arm that can smoothify the process where you can get a smooth installation.
  • Use your fingers on the wrench flats, and thread the perfect pedal on the right side of the arm. You can use a wrench to snug the pedal, where you will need some more efficient tools if you are using unique pedals.
  • Take an excellent mechanical advantage by putting the wrench on the flat. It will help you perform the installation smoothly, where you can go with multiple rounds while installing the pedals.
  • Hold the arm from one hand and use the other hand to hold the wrench, where after putting the pedal on, rotate it in the opposite direction, so the pedal goes into the arm crank quickly.
  • After rotating, you need to use the opposite arm as the lever, which will help you tighten the pedals. After done with the hands, go with the proper wrench and tight the pedals, which will help you get a fixed pedal on the bike.

If you find some damage on the cranks, you can go with some minor modifications in the pedals by using a tap-set that will help you install the pedals effectively.

A Quick Tip on How To Maintain Bike Pedals

Your bike pedals are crucial tools to take you anywhere or enjoy an excellent destination while going on a road trip. If you regularly take care of the pedals, you can get stable pedals that will help you get a perfect ride anytime.

  • Keep them Clean: I always prefer to clean the pedals. You don’t need some fancy cleaners, but choosing a soapy water bucket will give you instant cleaning.
  • Lubricate the pedals: Pedals need lubrication, which you can provide regularly. Make sure to keep oil in the crank arm with the help of some small tubes.
  • Get a professional service: When using a bike, servicing is crucial to maintaining every part’s flow. Make sure to leave your bike with a professional who will clean the bike and complete care.
  • Do some drills: Pedal drilling is crucial for every cyclist, where you can go with your friends to a mountain range and other places to give a continuous movement to the pedals. It will enhance the smoothness of the pedals and provide them a long life.

Frequently Asked Questions

How Do You Unscrew Bike Pedals?

The crucial aspect while changing the pedals is to resist any type of injury. However, the bike pedal removal process can give you some sought of injury, where you can use some safety kit while unscrewing the bike pedals.

You will need some crucial tools to maintain the flow of unscrewing the bike pedals, which you can choose with practical solutions.

While unscrewing the bike pedal, use a wrench or hex that will help you remove the pedal easily. If you face some tightness in the pedals, go with the lubrication and remove the dirt from the pedals.

The lubrication will smooth the arm crank and give your pedals a smooth replacement. Next, rotate the pedal in a likewise direction, that can help you loosen the screw.

You can figure it out with a rotation, where the pedal is not rotating smoothly. Then, you need to go with the same tactic to unscrew it.

Are All Bike Pedals Reverse Threaded?

This is the worst thing while changing the bike pedals because you may keep tightening the pedal without perfect threading. The left and right pedal are different from each other, which many people realize after damaging their wrench.

The right pedal comes with a right-hand thread, which you need to lose in the counter-clockwise direction.

The manufacturers always mention the right and the left part of the pedal, which you can go with the right tools to understand. The left pedal spindle is always reverse threaded, where the right pedal comes with the regular thread.

It would help if you went in the expected direction while loosening the left pedal, which will give you a smooth operation on the pedal removal.

The left pedals always come with unusual threading, where you will find a right pedal with regular threading.

How Do You Remove Pedals Without A pedal wrench?

Sometimes you may forget to take a pedal wrench while taking off the pedals, where you can go with different ways of removing the pedals.

  • Place the bike on the right side.
  • Insert the spanner in the perfect place.
  • Rotate the spanner in the counterclockwise direction.
  • The pedal got free. Remove it from the arm.
  • Turn your bicycle around.
  • Rotate the arm crank in the direction.
  • Position the spanner in the right direction, and you have now safely removed the pedals without the wrench.

It is common when we forget to have a wrench while removing the pedals. Also, if no spanner is there, you can go with your bare hands, which will require a more significant force.

You can put your hand at the opposite pedal arm and use a hex to loosen the pedal.

How Do You Remove Stubborn Pedals?

Sometimes due to dirt and water, the pedal got stuck into the arm. You can also change the stubborn pedals from the bike without using much energy. Stabilize your bike, and create a better space to remove the pedal. It would help if you had some lubrication to make it smooth and use penetrating oil.

Apply some heat to the metallic part of the pedal arm. The oil will take some time to reach every aspect of the pedal arm, where you can leave it overnight to remove it quickly.

If your tools are now opening the pedal, you are at the right place, but you can choose some hammering to the pedal arm if you are not getting a smooth flow.

Hammer the pedal slightly that will offer you more leverage, where you can get easy removal of stubborn pedals.

Conclusion

Removal of pedals is not a complicated task if you are using the right tool and tactics.

Pedals are crucial components of a bike, where you need some force and perfect strategy to replace your older pedals with the new ones.

With a bit of knowledge of replacing your pedals, you can generally remove them and get a new pedal set on your next biking trip. Pedal changing is necessary for various riders, which gives a perfect balance in the long ride.

Also Read,

Best Fat Tire Bikes For Women | Review & Comparison

Best Folding Bikes For Boating, Cruises & Sailing

Touring Bike vs Road Bike – What Should You Ride?

Essential Bike Accessories Which Every Cyclist Must Have

Scroll to top